Home

Introduction

Introduction Interface

Support Sentence

NMEA0183

Support AIS Message

Message Usage IALA Msg6 IMO Metero Hydro

FAQ

Chaining AtoN Status Bits MMSI

I/O interface

The following table description MANDO interface.

Connecor Type Description
Power 3-pin power input
VHF SO-239(female) connect to VHF antenna
GPS TNC connect to GPS antenna
CON1 12-pin See below table for detail
CON2 8-pin See below table for detail

CON1 Connector

Pin Color Definition I/O Description
1 Brown RS232_TX O Communication interface (NMEA0183 sentence)
2 Blue GND - Ground (RS-232)
3 White 1_PPS O 1 PPS (1 pulse per second output from built-in GPS module)
4 Green GND - Ground (GPS_1PPS)
5 Yellow ADC4 I Analog to Digital input 4 (0~36 V)
6 Gray ADC3 I Analog to Digital input 4 (0~36 V)
7 Pink ADC2 I Analog to Digital input 4 (0~36 V)
8 Red ADC1 I Analog to Digital input 4 (0~36 V)
9 Black RS232_RX I Communication interface (NMEA0183 sentence)
10 Orange GND - Ground (ADC)
11 Purple - - Reserved
12 Light Green - - Reserved

CON2 Connector

Pin Color Definition I/O Description
1 Black RS232_RX I Configuration interface (NMEA0183 sentence)
2 Brown RS232_TX O Configuration interface (NMEA0183 sentence)
3 White GND - Ground (RS-232)
4 Blue DO_NO - Digital-out Normal Open
5 Red DO_NC - Digital-out Normal Close
6 Oragne DO_COMM - Digital-out Common
7 Yellow DI_RTN I Digital-in return
8 Green DI I Digital-in (5~36 V)